support@herpesprocare.com
Application of the Herpes Viral Inhibitor (HVI)
Remove the cap and put it on the base so that the grip is better. Replace cap over probes when you are done using the HVI.
Clean the afflicted area of the skin removing all lipstick, gloss, balm, lotions, oils, etc. Leave the area just a little moist and clean. It is important not to make the area wet, just a little moist. If the area is to wet both lights will come on when the red button is pushed and treatment will not occur. If this happens pat the skin with a cloth and try the HVI again. Clean probe with an alcohol wipe. Do not submerse the NBE in any liquid!
Press HVI probes on the skin across Cleaned afflicted area so that the probes are on opposite sides of a blister,Lesion or Pain spot, then push and release RED start-button on the side of the HVI, Lights will come on indicating the start of a treatment.
A timed wave flowing through the skin will accour, first one direction then the other.
The length of time the light is on shows the time of the flow.
It is normal to feel a slight electrical tickle or a very mild shock-like sensation when the lights change.
One treatment takes about 20 seconds. It is normal to do several treatments on each blister each time you use the HVI. Typicaly on the hour for 8 Times a day.
It is appropiate to use the HVI hourly if a blister has formed, or even half-hourly if early tingling or feeling of pressure indicating a possible blester is forming.
If both lights come on at the same time, the skin is too Wet, stopping the flow. Dry the skin slightly & Re-Apply the HVI.
Cold Sore/Fever Blister - Oral Herpes Simplex I - (light-use white CSI
- Cold Sore Inhibitor 2 lights both on the same side). Testimonials report EARLY Application Prevents lesions and blisters, normal recovery in hours.
Genital Lesion - Herpes Simplex II - (heavy-use light blue color HVI - Herpes Viral Inhibitor 4 light 2 on each side). HVI uses a little stronger approch and is more effecteve on most applactions. It also comes with a one year warrenty. Pre-lesion symptoms vary. If you feel a bleaster starting, apply a treatment at once. It is much better to catch it eary.
Shingles - Herpes Zoster - (heavy-use light blue +color HVI - Herpes Viral Inhibitor 4 light). Choose sites of pain, rash and blisters. Multiple outbreak areas will need to be teated each hour, requiring more Applications. Use Criss-Cross pattern Probe placement.
Molluscum - Herpes Contagium - (medium-use color HVI -
Herpes Viral Inhibitor 4 light). Apply HVI to painful hard pearly white tiny papules each hour. Sometimes detection is difficult but early application prevents papules.
Warts, Moles and Growths - Herpes Papilloma Condyloma - (heavy-use light blue color
HVI - Herpes Blister Eliminator 4 light). Apply probes in a 4-Star pattern to each wart, mole
or growth. Skin Needs to be moist so that conduction will be increased. If all lights come on, the skin is too wet. dry skin and re-apply. Continue to treat for a few months untell the warts and moles are gone.
LOW COST! Enclosed, Battery as these batterys are last a very long time. They may exceed use-by-date found on the battery that use-by-date code is seven years on the batterys we use. The light blue Color-Model
HVI - Herpes Viral Inhibitor may perform for several years in light-use, or over a year in heavy-use (shingles). That make the cost per use very economical, only Pennies per Application.
Warranty White-Model 90 days, light blue Color-Model 1 year. Extended warranties may be purchased.
Disposable: to reduce viral contamination transfer to others or re-infest of self!
TEST, to see if HVI is stell Working. Hold the probes' sides to a metal coin (quarter), then push and release RED start-button.
All color lights will simultaneously come on, indicating HVI is functioning properly. Repeat on probes' rounded tips to check for skin oils on probes causing them not to conduct. Use light abrasive cloth to remove substances from rounded tips and clean with alcohol wip.
Do not immerse the Herpes Viral Inhibitor in liquids. The manufacturer warrants the HVI - Herpes Viral Inhibitor to apply less than 10 volts across probes and less
than 10 milliamps between probes, and makes no other claims for its efficacy in use, nor supports any views
expressed on this website. 9Feb09 11pm
